冠诚机械 设为首页 冠诚机械 收藏本站 冠诚机械 联系方式 
分享到:
切换至旧版网站 选金溜槽 冠诚服务
冠诚机械 冠诚机械
冠诚服务电话
给我发消息
| 网站地图
选金溜槽 公司首页 选金溜槽 关于冠诚 选金溜槽 产品与研发 选金溜槽 新闻中心 选金溜槽 选金溜槽 选金溜槽 服务与配件 选金溜槽 实验现场 选金溜槽 视频展示 选金溜槽 成功案例 选金溜槽 联系我们 选金溜槽
选金溜槽
 
选金溜槽 淘金溜槽相关 选金溜槽
选金溜槽 选金溜槽出口
选金溜槽厂家 选金溜槽价格
甘肃选金溜槽 西藏选金溜槽
山东选金溜槽 东北选金溜槽
江西选金溜槽 云南选金溜槽
青海选金溜槽 新疆选金溜槽
主要产品推荐 主要产品推荐 主要产品推荐
选金设备 海沙淡化设备
磁选机 干选机
球磨机 球磨机 球磨机
过滤机 分级机
球磨机 尾矿回收机
破碎机 破碎机 破碎机
筛沙机 振动筛
振动给料机 制沙机
反击式破碎机 高效细碎机
鄂式破碎机 双辊破碎机
无堵锤式破碎机 破碎生产线
挖沙船 挖沙船 挖沙船
运输船 钻探抽沙船
选铁船 挖泥船
自卸式抽沙船 挖沙船
 
服务与配件 客户现场
相关视频展示
磁选视频
 
    冠诚机械 冠诚机械    
冠诚机械 新闻中心 冠诚机械
您现在的位置:首页》详细页面
 
选金设备选矿原则-选金溜槽,罗斯溜槽厂家,龙江溜槽出口-青州冠诚重工机械有限公司
发布时间: 2016-1-10
文字 〖 自动滚屏(右键暂停)

选金设备选矿原则是先用重选法最大限度的从原矿砂中回收金及其伴生的各种重矿物,继而用重选、浮选、混汞、磁选和静电选等联合作业将金和各种重矿物彼此分离,以达到综合回收的目的。砂金矿选别一般分为碎解与筛分、脱泥和选别等过程。

1、选金设备碎解与筛分很多砂金矿含有胶结泥团,其粒径有的大于100毫米,这种泥团如不碎解,将在筛分过程中随废石一起排除,造成金的损失。另外,胶泥还能胶结在砾石或卵石上,如不碎解也要在筛分过程中造成金的损失。
2、脱泥
砂金矿中小于0.1毫米的物料一般不含金或含金甚微。小于0.1毫米的金俗称飘浮金,在选别过程中很难回收,而同一粒级的矿泥却对选别过程,特别是机械选别过程起干扰作用。所以,在砂金矿机械选矿厂内,总是设法将小于0.1毫米的矿泥脱掉。生产上常用的脱泥设备为各种规格的脱泥斗。而溜槽选金允许的物料粒级宽,且处理量大,因而硫槽选别之前多不脱泥。
3、选别
选金设备重选法是处理砂金矿最有效、最经济的方法。由于砂金矿中金的粒度组成不同,各种重选设备处理物料的有效粒度界限也不同,所以合理的砂金矿选别流程应是几种重选设备的联合作业。

Choose gold equipment dressing principle is first with gravity maximum limit from the original ore recovery of gold and its associated with all kinds of heavy minerals and then by gravity, flotation, amalgamation, magnetic separation, electrostatic separation combined operation will be gold and all kinds of heavy minerals separated from each other, to achieve the purpose of comprehensive recovery. The selection of sand and gold ore is generally divided into the process of crushing and screening, dewatering and sorting. 1. Choose gold equipment broken solution and screening a lot of placer gold containing cement mud pie, the particle diameter of some greater than 100 mm, the mud if not broken solution, in the screening process with waste exclusion, resulting in the loss of gold. In addition, clay cementation in gravel or cobble can, if not broken solution will cause the loss of gold in the process of screening.

2, take off the mud

Gold ore less than 0.1 mm of the material is generally not gold or gold. Less than 0.1 mm gold commonly known as floating gold in selected don't process is difficult to recover, and slime of the same particle level but the separation process, especially machinery course interference effect. So, in the sand gold mineral processing plant machinery, always try to place less than 0.1 mm slime off. The commonly used equipment for the production of mud for a variety of specifications of the mud bucket. The chute gold allowed material particle width, and large processing capacity, so the sulfur separation tank before multi undeslimed.

3, the election

Choose gold equipment gravity method is the most effective, the most economical processing of placer gold. Because of different particle size of sand gold, a variety of gravity concentration equipment material handling the effective size limits are different, so reasonable placer gold separating process should be combination operation of several gravity separation equipment.

 


 
>> 点此处返回首页 >>
 
网站首页 | 联系我们 | 视频中心 | 客户现场 |
友情链接: 食用油灌装机 挖改钻 皮带输送机厂家
鲁ICP备09020970号-4鲁ICP备09020970号-25 鲁ICP备09020970号-18 鲁ICP备09020970号-32版权所有:青州冠诚重工机械有限公司 地址: 青州市弥河镇 技术支持:青州市冠诚网络科技有限公司
产品关键词:选金溜槽,选金溜槽厂家,山东选金溜槽厂家,选金溜槽价格,选金溜槽出口,山东选金溜槽,青州选金溜槽
手机:+0086 15053659999  15653473333 电话/传真:0536-3593111  售后客服0536-3584888 磁选机
QQ:磁选机  QQ号:1592999333